Full ESD Product List

Antistatic Mats & Workstations

Antistatic Rubber Rolls

Wrist and Heel Ground Straps

ESD Testers and Monitors

Ground Cords & Snaps

Antistatic Hand Tools

ESD Tutorials FREE

Policies

Common Ground Point ACGP1

 
Common Ground Point ACGP1
Click the images for a larger view

Common Ground Point

Common ground points solve a common problem at anti-static work stations. That is, how and where to connect the anti-static equipment to earth ground. Anti-static table mats usually have a ground cord for grounding only the mat itself. But operators also need a convenient method of grounding their anti-static wrist straps as well. Common Ground Point ACGP1 provides a convenient means to ground your anti-static table mat, and one or two anti-static wrist straps at the same time.

A 10mm female snap on the bottom side of the common ground point attaches to a 10mm male snap on the anti-static table mat. Two banana plug holes located in the block of the common ground point allow for the easy connection of two wrist strap ground cords. Static mat and two operators are then grounded. Static-ESD also carries low profile static mat ground cords.

Common Ground Point Features

• low profile design
• includes 10mm female snap for easy attachment to most mats (check your snap size)
  • optional accessory: matching 10mm male clinch snap permanent mat attachment (not included)
• two banana plug holes allow simultaneous grounding of two wrist straps
• 15 ft of stranded copper wire ground cord
• no built in resistor (most wrist strap cords already use one)
• 5.4mm (internal diameter) eyelet for attachment to earth ground
• front edge bench mounting of the ground block is also possible via two screw holes

Price

Common Ground Point ACGP1 is economically priced at:

Quantity 1 to 9 $ 7.95
Quantity 10 or more $ 7.39

Mail or FAX Order Common Ground Point ACGP1

Static-ESD Home Page .